Saniflo Saniplus Pump Only Saniplus Macerating Series Pump Only – SANIPLUS PUMP ONLY

Saniflo Saniplus

imageasp2 Saniflo Saniplus Pump Only Saniplus Macerating Series Pump Only   SANIPLUS PUMP ONLY

Saniflo Saniplus

Saniflo Saniplus Macerating Series Pump Only

The Saniplus is a system that is used to install a complete bathroom up to 15 feet below the sewer line, or even up to 150 feet away from a soil stack. The macerating system of the Saniplus can handle up to four fixtures, toilet, hand basin, shower and bathtub. The Saniflo Saniplus toilet uses only 6 liters (1.6 USG) of water per flush.

The Saniflo Saniplus is simplicity itself to install; there are just four connections.

  • The macerating pump is connected to the spigot of a horizontal outlet toilet.
  • The toilet tank is connected to the water supply.
  • The macerating pump is connected to the small diameter discharge pipe work.
  • The macerating pump is connected to the electrical supply.

The Saniflo Saniplus macerating system is comprised of a pressure chamber, which starts and stops the unit, and the motor, which drives the stainless steel macerator blades and pump.   A normal operating cycle for Saniplus takes about 10–20 seconds depending upon the discharge pipe run configuration; power consumption is therefore minimal.

moreinfo Saniflo Saniplus Pump Only Saniplus Macerating Series Pump Only   SANIPLUS PUMP ONLY

Optional Extension Pipe Available for Remote Mounting.

Dimensions: 12″ H x 21″ W x 8″ D
Amperage: 7.2
Voltage: 110
HP: .4

236 total views, 1 views today

Add a Comment

Your email address will not be published. Required fields are marked *