Saniflo Saniplus Toilet with Macerator Series Pump – SANIPLUS

Saniflo Saniplus Toilet with Macerator Series Pump – SANIPLUS

Install a Toilet Anywhere You Want.  High Level Of Styling.

Saniflo Saniplus Toilet with Macerator Series Pump - SANIPLUS
Saniflo Saniplus Toilet with Macerator Series Pump - SANIPLUS

Installing a bathroom where you want is often difficult and sometimes even impossible. The main drainpipe is either too far away, or the new bathroom or sink will be lower than the drainpipe, making conventional installation unworkable.

The Saniflo Saniplus is a system that is used to install a complete bathroom up to 15 feet below the sewer line, or even up to 150 feet away from a soil stack. The macerating system of the Saniplus can handle up to four fixtures, toilet, hand basin, shower and bathtub. The Saniflo Saniplus toilet uses only 6 liters (1.6 USG) of water per flush. The Saniflo Saniplus macerating system is comprised of a pressure chamber, which starts and stops the unit, and the motor, which drives the stainless steel macerator blades and pump.   A normal operating cycle for Saniflo Saniplus takes about 10–20 seconds depending upon the discharge pipe run configuration; power consumption is therefore minimal.

  • Toilet has a Rear Spigot
  • Requires 1.6 gallons (6 liters) of water per flush
  • Includes Macerating pump
  • Toilet bowl in a choice of white or biscuit
  • The WhiteToilet  available as rounded front or elongated (ADA Compliant) front, Biscuit available as Elongated Front Only
  • Optional Extension pipe available for remote mounting of pump
  • Toilet Seat Not Included

**See photo under specs for actual toilet sold**

Dimensions: Pump only-12″ H x 21″ W x 9″ D
Voltage: 110
HP: .4
Amperage: 4.5

david